BT Home Hub 1.0 Heatsink Mod
had some spare time and a heatsink salvaged from an old VGA card. Wanted to use it on BT HH1 as its CPU gets very hot.
So here it is, basically here is what i did
1. Salvaged a heatsink from an old VGA card.
2. Did not had access to thermal glue so used one of those two tubes that you mix to get the glue.
3. Used intel based thermal paste (gray) one big bulk in the middle of CPU.
4. used the glue on the 4 corners of the CPU so the paste in middle and the glue on sides.
Voila, here you have BT HH1 with heatsink (its lame ofc xd)
Follow this link to check the pics.
Last edited by daemon123; 22-08-2011 at 12:30 PM.