This user.ini contains the settings to run the BT Home Hub 2.0A on PPPoE LLC encapsulation.
There is a full readme file in the download that describes how to change the VPI/VCI to suit your ISP.
This file was created and generously donated by forum member Sasiela.
If you FTP this file into the /dl folder on the router and reboot it will automatically setup the home hub for use on 02's LLU broadband system. Should also work with BE broadband
These are the files required to flash the V2.0 Home Hub as described in the article here.
This is the latest firmware. It has improvements to wireless and fix for big uploads crashing the router.
BRJtag 1.7j Jtag software which supports the Numonyx/ST Micro M29W128 flash rom that has been used in some newer HH2.0As.
This is also included in the Home Hub 2.0A flash files instead of the original 1.6r. So if you have the flash files already grab th
These are the original files that we used to flash the V2.0 Home Hub as described in the article here. They have now been superseded bt the version 8.1.H.J. Which has a few bugfixes and Wireless N
Many thanks.... I'm looking forward to the time in between now and the stroppy teenager lol..... fingers crossed... my HH2 is packed away as it was too unstable on my current ISP (i tried two