Forum: Home Hub 1.0 & 1.5 Hacks Discussion

hi, I used the given method and used the BT firmware exe but in the end it said unsuccessful and now all lights are on and I can't connect to the...

Hi, I recently acquired a HH 1.5 with Hub phone. After upgrading it to Thomson firmware 6.2.29.2 using the guide I put together some months back,...

Hi to all! I have bought HH 1.5 Product Name: BT Home Hub 15 Serial Number: CP0748xxxxx Software Release: 6.2.6.E Software Variant:

I just went back to one of my bricked 1.5 hubs that had a failed red-boot install. I managed to get it to Jtag via ...

How to set other VPI/VCI on unlocked firmware 6.2.2.6 ?

Hello, I tried flashing my BT Home Hub v1.5 and got to where it says to unmount and reboot the hub, I did so and is now just showing Broadband and...

Got one of my 1.5 HH out of storage the other day, one that previously I had put a Jtag lead onto. This was a box that I had previously played a...

Hi, so far i am able to do these #downgrade V1 or V1.5 to 6.2.2.6 #get root #telnet to 192.168.1.254 # type or paste: :script add name =...

Recently I have flashed my stock pile of v1 and v1.5 hubs with the 626H based hack, the idea being they will all be ready for anyone who needs one, I...

Did you try to flash Home Hub 1.0 with ST790 firmware ? some guy sell it as ST790 with fine working VOIP, DECT. ...

Upgrading didnt go well. The downgrading to 6.2.2.6 failed in between. Now when i turn on my router all i get is an orange POWER light ( stable)...

My BT Home Hub 1.0 is already running Speed Touch 6.1.9.6. 1. How to i change the VCI/ VPI? 2. I tried upgrading the software version but i...

Just wondering if the hack for the HH 1.5 can be adapted for use with Linux. I've just been given a still-in-the-box hub 1.5, but don't have...

Hi guys, I installed redboot onto my old bt home hub v1 last night and got it all sorted. I got up to the stage where I had to use the TFTP server...

Hi, I'v been wondering. Is it possible to overwrite BT HH 1.5/1.0 CFE (mtd4 or mtd3) with CANT-A CFE just like with a JTAG trick, but using just...

Hi The hack works up until installing and then I get a message that the hub has booted in the wrong mode What am I doing wrong Pete

Hello Has anybody figured out how to use SIP for VOIP with the HH? I have the unlocked firmware for V1.5 installed, I have configured the details...

Hi, I hope to be in the right place. I'm trying to install RedBoot/OpenWRT on my ST7G router following tutorial but I'm having troubles because I...